Preventive maintenance · Southern California

Autoclave preventive maintenance and service

Most autoclave breakdowns start as a worn gasket, a scaled sensor or a clogged filter that nobody replaced on time. A bench service once or twice a year costs less than one emergency repair — and you choose when the unit is away.

Models we see: Midmark M9, M11 and M3; Tuttnauer 2340M, 2540M, EZ9, EZ10, EZ11, 3870, Elara 11 and T-Edge; SciCan Statim 2000 and 5000; SciCan Bravo.

Open chamber of a tabletop autoclave with trays removed, cleaning brush and removed drain screen in front

What a bench service includes

  • Door gasket kit or Statim cassette seal replaced on the manufacturer's schedule.
  • Air, bacteriological and drain filters cleaned or replaced.
  • Chamber, reservoir and copper lines descaled; water-level sensor cleaned.
  • Solenoid valves, check valves and the pressure relief valve inspected and tested.
  • Heater, thermal protection and door switch checked electrically.
  • Full cycles run with chamber temperature and pressure checked against the unit's settings; the printout goes in your log.

From $349 per unit with the standard wear parts, plus the $125 pickup and return. If we find something that needs a repair, you get a quote first.

What it does, what failed, what it costs

SymptomUsual causeWhat we doPrice
Steam at the door, cycles that abort while heatingDoor gasket past its replacement intervalGasket kit replaced on schedule, before it failsin $349
LOW WATER, fill errors, a cycle that will not startScale and residue on the water-level sensor and in the fill linesReservoir drained and cleaned, sensor cleaned, lines flushedin $349
Wet packs, slow drying, stains on instrumentsClogged drain screen or air filter, scale in the chamberChamber descaled, filters and screens cleaned or replacedin $349
Pressure or temperature faultsA sticking valve or a relief valve that has not been exercisedValves cleaned and checked, relief valve testedin $349
Statim cycle fault 3, cassette leaksCassette seal past 500 cycles or 6 months, a clogged air filterCassette seal and air/biological filter replaced, pump flow checkedin $349

Prices are "from", with labor, ordinary parts and a test cycle. The final price comes after the bench diagnostic, and nothing is done until you approve it. All prices →

Manufacturer intervals at a glance

UnitWear partInterval
Midmark M9 / M11Gasket kitYearly
Tuttnauer EZPlusDoor gasket inspection; air filter12 months; 6 months or 1,000 cycles
SciCan StatimCassette seal, air/biological filter500 cycles or 6 months
SciCan Bravo G4Door gasket; general service1,000 cycles or 1 year; 3,000 cycles or 3 years

Maintenance plan

Two scheduled bench services a year, booked on the courier run in your area, with the loaner free on both visits and on any repair in between. A $199 loaner fee waived twice a year is most of the reason practices sign up.

What the price includes

  • Pickup and return anywhere in our Southern California area, the bench diagnostic and a written quote — $125, credited toward the repair.
  • After the repair: full cycles on the bench with a temperature and pressure check, the printout or log kept for your records.
  • A loaner on the same stop if you need one — from $149, free on repairs over $900.
  • 90-day warranty on repairs, 1 year on overhauls.

Questions

How often does a tabletop autoclave need service?

The manufacturers set the wear parts by time or cycle count: Midmark replaces the gasket kit yearly; SciCan replaces the Statim cassette seal every 500 cycles or 6 months; the Bravo door gasket every 1,000 cycles or 1 year. For a busy practice that means a bench service once or twice a year, plus the daily and weekly cleaning your staff does.

What is the maintenance plan?

Two scheduled bench services a year at the regular price, picked up on the run in your area. The loaner is free on both visits, and on any repair in between.

What does our staff still need to do?

Daily: wipe the door gasket and chamber rim, refill with distilled water. Weekly: drain and refill, and run the cleaner your manufacturer specifies. Our cleaning guide lists it by brand.

Can maintenance be done at our office?

We do it on the bench, where the unit can be opened, descaled and run on full test cycles with the right equipment. A loaner covers the days it is away.

Southern California pickup

Book a pickup

Tell us the model, the error on the screen and what it does. A technician reads it and texts you back with a price range and the next pickup day in your area.

  • Pickup, bench diagnostic and return — $125, credited toward the repair
  • A tested loaner swapped in on the same stop, from $149 — free on repairs over $900
  • A written quote before any work starts
  • Typical bench time: 3 to 5 business days on the bench, parts permitting

Rather talk? Call or text (424) 622-8416.